1996-2002 Polaris XCR ULTRA XC Storm RMK SKS XCR ULTRA Replacement Seat Cover

Flat Rate pricing, your choice of colors!
Please see pics for the seat comparisons. There are 3 main seats that at close glance look the same but are not. There is a 4th for the 98 Storm 800 (not pictured) that is a unique seat. Please contact us if you have the 98 Storm800/RMK.
New aftermarket replacement seat cover for the Polaris Aggressive and Wedge models that had the tail light wrap around to the sides. Will not fit models that had the flat tail light on the back. 96-02 Storm, XCR, Ultra, SKS, RMK, Ultra/Ultra SP.
See list below.
Please ask for assistance for fitment if your model is not listed.
Some of the 98 Storm 800 models had a different seat with a larger back section. If you have a 98 storm, please contact us prior to purchase to assist you.
Some of the RMK/SKS models have the flat tail light on back style with the 28″ long seat. We have that pattern as well.
We will be more than happy to help you figure out which seat you do have as most of the seats in this era were interchangeable.
Listing is for seat cover only, not the complete seat assembly.
Hand crafted made to order replacement seat cover.
Your choice of colors from selections shown.
Top seating vinyl is multiway stretch to improve longevity of the seat. No one else offers this. Red non slip no longer available.
Side/back material in your choice from the “side vinyls” which also include Hammered Metal(carbon fiber) and even Black Canvas.
No one offers more selections than Scottys!
MADE IN USA, right here in Michigan!
Keep in mind that if you are not the original owner of the machine, seats were frequently swapped out. you may have this style seat on a standard Polaris Indy sled not listed below. The wrap around tail light seat was a more popular seat than the standard seat with flat tail light and were often swapped out or ordered during sno-check.
1996 Storm 800/Storm RMK/Storm SKS
1996
Storm 800/800
Storm RMK/800 Storm SKS
1996
XCR 600 SP
1997 Storm 800/Storm 800 RMK/800 Storm SE
1997 Ultra SPX/SPX SE
1997 XCR 600/SE
1998 XC 600/700
1998 Polaris Indy Storm 800
(does not fit model with large back, please contact us if you have a 98 storm).
1998 Polaris Indy XCR 600
1998 Polaris Indy XCR 700
1998 Polaris Indy XC 600/700
1999 Polaris Indy XC 600/700
2000-02 XCR 800
Please
send us a note after the purchase to let us know what colors you
would like to expedite your order.
Seat
covers are made to order. We do not stock covers as the
customer can order any color combination they want. Please allow 3-5
business days to complete your order. This does not include shipping
times. After Labor Day we experience extremely high order volumes, so
please plan ahead when placing your order. We do not place any orders
ahead of another customer. During the Holidays, please allow extra
time to get your seat cover due to production and shipping delays we
experience at those times. In off season, Easter through July 4th, we
ship once a week.
Return Policy: No
RETURNS:
Effective January 1, 2012. Please read return policy prior to
purchase. We MUST be notified about any quality issues of the seat cover we
made you within 7 days of receipt. NO EXCEPTIONS.
You expect us to make the seat cover in a
week, we expect you to notify us of any issues within a week. Please don’t wait
several weeks or months to try putting your seat cover on. If we make a
mistake, we will fix the seat cover or send you a replacement. If you make a
mistake, you now have a spare. We pride ourselves in customer service; we take
very good care of our customers, as you can see from our feedback. However, we
do have to set some limitations. Under no circumstances will warrant any seat
cover that has been stapled on. Please dry fit your seat cover for fitment
first.
Bottom line, if you
have an issue, contact us. And please be courteous. We are not a retail store,
we are a service provider. We do not stock seat covers, they are made to your
order(s). Think of us more like a contractor you hired to build you a new patio.
They don’t stock patios, they build it to your order.
We cannot list everything we do not cover in our policy, as
customers always seem to come up with something new and bizarre.
We only warrant the seat cover to fit the
models listed in the description, to be free of defect. Everything else, we don’t
cover.
We do not warrant this to be
exact OEM colors and material. If you need OEM, you must order from your OEM
dealer.
We will not accept “refused” or “return to sender” return
shipments. They will be treated as abandoned. No exceptions. We do not offer
refunds.
As of January 1, 2012, we do
not offer swapping out for the correct model if you ordered the wrong one. It
cost us way too much time and money to flip the bill for customers making a
mistake and have to eat a seat cover. We have other customers and dealers who
also need seat covers that are on the build list. We are very busy year round,
so please be diligent about what you order the first time. If in doubt, please
ask and we will be more than happy to help you.
We cannot guarantee fitment for models made outside the USA.
99% of the time, there is not an issue.
There are very few occasions the models made for other countries, will
have different seats than what we have here in the USA. Limited edition,
sno-check(early order), etc., models we may know nothing about.
If you experience this, we may require you to
send in your stock seat cover to make a new one for you.
Model fitment:
We
make every attempt to list all the models we know our pattern to fit. If it is
not on the list, we cannot guarantee fitment.
To find your exact year, please look at the manufacturer
date stamped on the side of the tunnel. If all you have is a VIN, please
contact your dealer to have them trace that and tell you what exact year and
model it is. Example, if manufacturer date is 03/2010, that machine is a 2011
model, not a 2010. Seats vary drastically year to year.
Snowmobiles over 10
years old, may not have OEM support any more, and parts numbers are hard to
cross reference. We make every effort to research what models our patterns fit.
Our data is only as good as the database(s) and our experience is. We often
find odd models, limited editions, sno check, etc that are not in the database.
Not all models on our database cover models made for
countries outside the USA. Most of the time its not an issue, but we do see
instances where international snowmobile seats are different than what we have in
the USA. It also does not cover the “build your own sled” promotions that
manufacturers had/have. Many older sleds, people have swapped seats out from
other models or years.
If you are not
positive it’s the original seat, drop us an ebay message and we will do our
best to help you out. With over 30 years of experience with snowmobiling and
snowmobile related business(es), we have a vast knowledge of snowmobiles, but
are far from omniscient.
Most optional 2up seats for single rider sleds are NOT in
the database and can be very difficult to validate. Occasionally some seats are
recalled for manufacturer defect. Those seats will not be in the database as
the numbers have been superseded with the new part number.
Most sleds over 10 years old, are now being dropped from OEM
part support by many of the manufacturers. We accumulate data over the years of
research and experience. Many a times we find we just cannot cross reference
models we once did 2 years ago, because they are NLA from the manufacturer. We
also occasionally find mistakes in the manufacturer database.
Installation.
Unless
specified with special instructions, most seat covers are installed
by removing your stock seat cover and installing the new one using a
staple gun. For most Arctic Cats, you will need to use the existing
lumbar seam rod(metal rod that goes in the lumbar seam where the
straps are attached to the seat) and the U shaped rod that holds the
straps through the foam from your old seat. Those are no supplied. A
fabric steamer(hand held ones work fine and are available at Walmart
or other department stores for under $20) work very well to help
remove the remaining wrinkles. You can also use a hair dryer
carefully on low heat. Some seat covers or seat mod kits may require
the use of 3M 90 Spray(Home Depot, Hobby Lobby, Joannes Fabric, and
other hardware stores) adhesive to assist in the installation. We
will usually notate in the listing any special instructions needed if
applicable. To save on trees and waste, we do not include
instructions with the shipment.
Most seats do not come
with tail light holes cut out. Because these patterns may fit
multiple models that had a tail light mounted on the tunnel, we do
not cut them out and leave that for you to complete. This is the case
with most Arctic Cat, Polaris and Yamaha seats. Most Skidoo seats
have a recessed tail light pocket and that is included as part of the
pattern. Please feel free to ask any questions we will help out where
we can.
We are constantly working on
adding new models to our line up. Please visit our Ebay store to see
our listings. If you do not see what you need, please ask and we will
assist you.
Please do not use a
knife to open the box when you receive the cover, to avoid damage to
the vinyl.
International
Buyers – Please Note:
Import
duties, taxes and charges are
not included
in the item price
or shipping charges. These charges are the buyer’s
responsibility.
Please
check with your country’s customs office to determine what these
additional costs will be prior to bidding/buying.
These
charges are normally collected by the delivering freight (shipping)
company or when you pick the item up – do not confuse them for
additional shipping charges.
We
do not mark merchandise values below value or mark items as “gifts”
– US and International government regulations prohibit such
behavior.
1996
Storm 800 STD/RMK/SKS
1996
XCR 600 SP
1997 Storm 800 STD/RMK/SE
1997 Ultra SPX/SPX SE
1997 XCR 600/SE
1998 XC 600/700
1998 Polaris Indy Storm 800
1998 Polaris Indy XCR 600
1998 Polaris Indy XCR 700
1998 Polaris Indy XC 600/700
1999 Polaris Indy XC 600/700
2000XCR800
2001 XCR 800