Cloud Microphones Cloudlifter CL-Z 1 ch Variable Impedance Mic Activator 294938

  • 04

$117.01 (-40%)

100

  • Brand: Cloud
  • UPC: 793573085559
  • Number of Channels: 1
  • Model: Cloud Cloudlifter CL-Z
  • Features: Phantom Power
  • Condition: Customer Return 10 out of 10, includes everything PERFECT
  • Number of Outputs: 1
  • MPN: CL-Z
  • Number of Inputs: 1
  • Preamp Type: Microphone Preamp
  • Color: Multicolor

    • Key Features
    1x Mic Input
    Variable Impedance 150 Ohms to 15 kOhms
    HPF Variable from 20 Hz to 200 Hz
    +12 dB or +25 dB Gain Settings
    Increases Gain Before Feedback Ratio
    Use with Passive Dynamic & Ribbon Mics
    Requires Only Phantom Power to Operate
    Ideal for Long Cable Runs
    Use with Low-Output Mics
    Use with Noisy or Low-Gain Preamps
    The
    Cloudlifter CL-Z Variable Impedance Mic Activator
    from
    Cloud Microphones
    is a compact, single-input solution for common audio problems in the field and in the studio involving low-output passive microphones, including ribbons. The CL-Z uses any standard phantom-powered mixer or microphone input device to provide up to +25 dB of clean gain, variable input impedance, and a variable high-pass filter. Having an input impedance control that is sweepable from 150 Ohms to 15 kOhms allows you to creatively load the microphone’s output transformer, with the result being a wide range of new tonal variations becoming available to each mic.
    The CL-Z improves signal-to-noise ratio and improves the performance of passive microphone signals by driving stronger, cleaner signals over longer XLR cable runs, making them ideal for broadcast, live, and studio applications. It is housed in a rugged steel enclosure which offers shielding and durability.
    Variable High-Pass Filtering for Proximity Effect Control
    The variable high-pass filtering works in conjunction with the impedance value, allowing for even more tonal shaping and control. When engaged, the frequency cutoff is affected by the impedance setting. This allows for a sweepable frequency cutoff range from below 20 Hz to approximately 200 Hz, just by turning the “Z” knob. This can be especially useful for tonal shaping or reducing the proximity effect of a ribbon or dynamic microphone
    Variable Gain
    The CL-Z has a two-position gain switch allowing for more gain, or the maximum gain available. Most of the time the MAX (approx. +25 dB) position will be used, however, the reduced gain setting (approx. +12 dB) may be useful in situations where the source does not require as much gain, or where more of the preamp’s color from additional gain is desired
    Features at a Glance
    Fully sweepable variable impedance loading from 150 ohms to 15 kOhms
    High-Pass Filter frequency is variable from below 20 Hz to over 200 Hz
    Dual gain settings allow for a +12 dB or +25 dB increase
    Increases gain before feedback ratio in live & public address performances
    Self-contained design requires only phantom power
    Compatible with tube, battery, or power supply driven microphones
    Protects any passive ribbon with no transfer of phantom
    Utilizes Patent Pending Class A, Discrete JFET circuitry
    Rugged, road ready and portable, for studio, stage and broadcasting
    Handcrafted entirely in the USA
    In the Box
    Cloud Microphones Cloudlifter CL-Z Variable Impedance Mic Activator
    Limited Lifetime Warranty
    MPN: 294938
    UPC: 793573085559

    Main Menu